new ishow v30 ethernet stage laser light software 64 bits and usb to ilda box laser software



Mini R&G Auto/Voice Control LED Laser Stage Light Projector With Remote For Xmas Party KTV Disco Mini R&G Auto/Voice Control LED Laser Stage Light Projector With Remote For Xmas Party KTV Disco Новинка

Mini R&G Auto/Voice Control LED Laser Stage Light Projector With Remote For Xmas Party KTV Disco

15.69 руб.
Specifications: Item Type: Stage Light Material: Aluminum Working Voltage: AC 110-240V/ 50-60Hz Output Voltage: 5V 1A Output Power: 5mw - 50mw Unit Primary Laser Colors: Green and Red Red Wavelength: 650nm, power: 100mW Green Laser Wavelength: 532nm, power: 50mW Control Type: Automatic/ Sound Activated Cable Length of Power Adapter: Approx.100cm Length of Tripod Approx.9.5cm Dimension Approx.10.5(L) x 9.3(W) x 5.2(H)cm Power Adapter: UK Plug, US Plug, AU Plug, EU Plug Features: 1.High quality aluminum alloy housing. 2.With a built-in fan for heat dissipation. 3. IR Remote control laser stage light 4.Stable & reliable, Compact and lightweight. 5.With a tripod, conveniently to place it at anywhere. 6.With a project-light hole, it gives out brilliant colorful light beams. 7.Suitable for Disco, ballrooms, KTV rooms, bars, stages, parties and hotels, etc. 8.Red and green "stars" sparkle/move/combine/appear/disappear automatically or according to sound/music Note: We will send you a free plug adapter according to your country or area. Kindly Reminder: 1. Avoid direct eye contact with the laser. 2. Do not turn on and off it frequently and try to avoid making it worked for a long time. 3. This unit is intended for indoor use only and should be prevented from water, moisture and shake. Package Included: 1 x Laser Projector 1 x Remote 1 x Tripod
2 Axis Stepper Motor Driver Board Controller Laser board  For DIY Laser Engraver 2 Axis Stepper Motor Driver Board Controller Laser board  For DIY Laser Engraver Новинка

2 Axis Stepper Motor Driver Board Controller Laser board For DIY Laser Engraver

20.98 руб.
Description: 2 Axis Stepper Motor Driver Board Controller Laser board For DIY Laser Engraver Software(GRBL,Benbox): Please try to use this software to run the device: https://www.dropbox.com/s/74vtmjfcsbbxxv1/Software%20%26%20Driver%20Solution.zip?dl=0 Specification: Interface:USB Size:94*46mm Hole Size:85x36mm Support Axes:XY axis Power Requirement: higher than12V 2A Support Stepper Motor: Motor within 2A 2-phase 4-wire Input Voltage:12V Power Interface: DC5.5 - 2.1 (Inside is positive electrodes and ouside is negative electrodes) Feature: Fit for DIY desktop laser engraver,dispensing machines printer,plotter MINI USB interfaces, 12V power supply, delivery lines. Send software. 2-axis linkageY-axis dual interface, can drive a stepper motor within 2A 2-phase 4-wire Large MOS tube,onboard DC buck module, jumper ADJ can adjust manually the laser voltage to control the laser power Note: There isn't Voltage Regulator Module in this Laser board The motor can not work hight than 2A, when the motor work for a long time in 1A to 2A please pay attention to heat Wiring instruction: Package included: 1X USB 2 Axis Stepper Motor Driver Board 1X USB Cable 6X Dupont Lines
USB Laser Handheld Barcode Scanner/Reader for Desktop/Laptop USB Laser Handheld Barcode Scanner/Reader for Desktop/Laptop Новинка

USB Laser Handheld Barcode Scanner/Reader for Desktop/Laptop

1875.36 руб.
Model: XYL-820 - Provide an accurate easy and fast method of data entry and data storage for computerized information systems - Light source: Visible laser light wave length 650~670 nanometer - Reads the code precision: 0.1mm - Scanning width: 15~20cm - Ergonomic design comfortable feel to grip - Plug and Play - No drivers or special software are needed - Interface type: RJ45 - Best scanning angle: 45 degree - Angle of elevation: 60 degree - Comes with USB cable (1.5m-length) & English manual
NEJE DK-8 Pro-5 500mW USB Laser Engraver Printer for Hard Wood/Rubber NEJE DK-8 Pro-5 500mW USB Laser Engraver Printer for Hard Wood/Rubber Новинка

NEJE DK-8 Pro-5 500mW USB Laser Engraver Printer for Hard Wood/Rubber

3563.74 руб.
This DIY Laser Engraving Machine is great for amateur engraving usage with frame and weak light positioning. Just connect it to the computer and then print any pictures you like via the software provided. Sample Video High Speed 10 times faster engraving. Unique Frame Design Unique frame and weak light automatic positioning, frame positioning make the image positioning easier, weak light even would not be difficult to engrave in toothpicks, make engraving picture no excess residue and perfect, also safer to prevent fire. Powerful Design High power and high-resolution print, the soft material can print out the 3D and the gradient effect. Durable to Use Strong and cool design, high precision and stability, lone time use, NEJE developed the professional power IC and radiator, carving time will last much longer than other laser and more stable. 500mW Laser Truly 500mW blue and purple laser head, higher speed, support more types of materials. Application Can be used offline, even if leave the computer, only connect the two USB ports to charge or power bank (5V 1A). Can be Carved Items Hardwood, plastic, bamboo, rubber, leather, cut paper and so on. Can NOT Engrave Metal, aluminum, acrylic. Support OS Support Win 7, XP, Win 8. How to Use Connect to computer via two USB cable. Cone for power and one for transfer. Start the software. Install the software from included TF Card, or download from http://yunpan.cn/cmX7QiZHXWThg, password: 864b. Chose or import a picture, edit it. Make sure the picture is in the mid of the print area. Adjust the focal length and start print. Specifications Name Laser Engraving Machine Brand NEJE Model DK-8 Pro-5 Power 500mW Material Acrylic + Aluminum + Stainless Steel Work Area 38 x 38mm Product Size 14.5 x 16 x 19 cm Product Weight 1.35kg Package Size 30 x 20 x 21 cm Package Weight 1.5kg Package Includes 1 x Engraving Machine1 x Laser Protective Glasses1 x Allen Wrench 2 x USB Cables 1 x 5V 1A Power Adapter(w/1.2m Power Cable)1 x 1GB TF Card (Included the User Manual and Install Software)
Software Architecture and System Requirements Software Architecture and System Requirements Новинка

Software Architecture and System Requirements

4839 руб.
Software architecture and Requirement engineering are the two well known but independent areas of Software Engineering in every aspect like research and education. Requirements provide an important role to develop the software architecture. There are lot of methods to elicit requirements. This book focuses on the software Architectures, Software Requirements and their synergy. Multi-agents are especially under consideration in synergism of Software Requirement Engineering and Software Architecture. New Model of synergism of Software Requirement Engineering and Software Architecture of Multi-agent is also described in this book.
A Framework to Remove Vulnerability through Analysis Phase of SDLC A Framework to Remove Vulnerability through Analysis Phase of SDLC Новинка

A Framework to Remove Vulnerability through Analysis Phase of SDLC

4839 руб.
Security is a major problem in software development. Software defects lead to security Software is an important part of everyday life. Large number of peoples using internet, ATM, Mobile phones for their need. So for developing any software security is very much important things. Better way providing security from the initial stage of software development life i.e. security from requirement stage to the deployment of any software product. Security enhancement of the SDLC process mainly involves the adaptations or augmentations of existing SDLC activities, practices, and checkpoints, and in a few instances it may also entail the addition of new activities, practices . Secure software is not easily achieved and the actual scenario is that investments in software development process improvement do not assure software that resist from attacks or do not current security vulnerabilities. “A Framework to detect and analyze software vulnerabilities: Analysis phase in SDLC” is to identify, analyze and mitigate vulnerabilities during the analysis phase of software development life cycle.
An Approach for Classification and Retrieval of Reusable Components An Approach for Classification and Retrieval of Reusable Components Новинка

An Approach for Classification and Retrieval of Reusable Components

6390 руб.
Software Reuse is the process of implementing or updating software systems using existing software reusable components. To improve the practicality of software reuse one has to have knowledge of its location and understanding of the software reusable component. Hence the software reuse repositories must be developed with efficient representation of software components which facilitate the developer to locate and retrieve the components very easily as per the requirements.Software reuse greatly reduces the effort, development time and costs of the software.It focuses on various challenges involved in software reusable component classification and retrieval methods, ranking algorithms and optimization methods.A web based software tool is proposed with a new integrated classification scheme, to classify and retrieve as well as build a comprehensive software reuse repository.These chapters are more research oriented and are mainly intended for researchers working on software reuse.
USB RF Wireless Presenter with Laser Pointer for PC/Laptop - Black (10-Meter Range) USB RF Wireless Presenter with Laser Pointer for PC/Laptop - Black (10-Meter Range) Новинка

USB RF Wireless Presenter with Laser Pointer for PC/Laptop - Black (10-Meter Range)

829.81 руб.
This USB presenter is superior is ergonomic design allows user to comfortably take control of the PC and presentation. This presenter supplies presentation and laser pointer functions to make your presentation flow continuously. It is convenient to use in any USB port. This useful USB RF presenter with laser pointer offers great range reliability and freedom of movement. - Built-in laser pointer - Instant controlling of Microsoft PowerPoint & Media Player - To make your presentation flow continuously the Wireless Presenter integrates the slide up/down functions with a laser pointer on a remote hand held device using a wireless technology - The Wireless Presenter's attractive and compact design enables mobility of up to 10 meters from the laptop/PC while still maintaining a full navigational control of your presentations - The Wireless Presenter does not require any software and PC programming and take just a few seconds to install and use - USB 1.1/2.0 interface. Plug and play function. No PC programming or S/W driver - Working on any computer with USB port. - Frequency: RF 2.400~2.483GHZ - Powered by 1*AAA batteries (included) - Package includes: 1*wireless remote 1*USB receiver dongle 1*Chinese/English user manual
Relliance MP3-FM RGB Light Laser Projector Stage Lamp w/ SD / U Disk / FM - White + Transparent Relliance MP3-FM RGB Light Laser Projector Stage Lamp w/ SD / U Disk / FM - White + Transparent Новинка

Relliance MP3-FM RGB Light Laser Projector Stage Lamp w/ SD / U Disk / FM - White + Transparent

2313.08 руб.
Suitable for indoors avoid dusty environment. - Supports format: MP3 USB FM(87~107MHz). - Speaker specification: 3W(L)3W(R); LED power: 24W; Laser lamp light: RGB light. - Working environment: stage lamp DJ ballroom KTV bar party wedding party decoration and so on.

кешбака
Страницы:


This DIY Laser Engraving Machine is great for amateur engraving usage with frame and weak light positioning. Just connect it to the computer and then print any pictures you like via the software provided. Sample Video High Speed 10 times faster engraving. Unique Frame Design Unique frame and weak light automatic positioning, frame positioning make the image positioning easier, weak light even would not be difficult to engrave in toothpicks, make engraving picture no excess residue and perfect, also safer to prevent fire. Powerful Design High power and high-resolution print, the soft material can print out the 3D and the gradient effect. Durable to Use Strong and cool design, high precision and stability, lone time use, NEJE developed the professional power IC and radiator, carving time will last much longer than other laser and more stable. 500mW Laser Truly 500mW blue and purple laser head, higher speed, support more types of materials. Application Can be used offline, even if leave the computer, only connect the two USB ports to charge or power bank (5V 1A). Can be Carved Items Hardwood, plastic, bamboo, rubber, leather, cut paper and so on. Can NOT Engrave Metal, aluminum, acrylic. Support OS Support Win 7, XP, Win 8. How to Use Connect to computer via two USB cable. Cone for power and one for transfer. Start the software. Install the software from included TF Card, or download from http://yunpan.cn/cmX7QiZHXWThg, password: 864b. Chose or import a picture, edit it. Make sure the picture is in the mid of the print area. Adjust the focal length and start print. Specifications Name Laser Engraving Machine Brand NEJE Model DK-8 Pro-5 Power 500mW Material Acrylic + Aluminum + Stainless Steel Work Area 38 x 38mm Product Size 14.5 x 16 x 19 cm Product Weight 1.35kg Package Size 30 x 20 x 21 cm Package Weight 1.5kg Package Includes 1 x Engraving Machine1 x Laser Protective Glasses1 x Allen Wrench 2 x USB Cables 1 x 5V 1A Power Adapter(w/1.2m Power Cable)1 x 1GB TF Card (Included the User Manual and Install Software)
купить new ishow v30 ethernet stage laser light software 64 bits and usb to ilda box laser software